Furuno FEA-2107-BB Installation Manual page 57

Log
Settings when log is using
Analog Pulses 200 p/nm. Note
that log is used for water speed
component if the dual-axis log is
available.
Settings when log is single axis
pilot log transmitting
IEC-61162-1. Message used is
VBW.
Settings when log is used to
find out water speed component
from a dual-axis log using
IEC-61162-1. Sensor log uses
water tracking values of VBW
message.
Notes:
• Talker identifier can be defined for IEC 61162-1 (typical talker for log is VD). If talker
identifier is defined as XX, then it is ignored.
• Analog pulses are from optional B-Adapter.
4
Analog Pulse (uses B-Adaptor)
8
8
3. ADJUSTMENTS
3-15