Furuno FEA-2107-BB Installation Manual page 65

Radar Displays
There are 6 basic device interface alternatives:
1) Device interface FURUNO: IEC 61162-1 (TX Talker ID = II) includes all standard
messages for an ARPA radar target data receive interface. Further it also contains a lot
proprietary messages supporting integrated navigation features such as user charts,
routes, curved EBL, etc.
2) Device interface FURUNO: IEC 61162-1 (TX Talker ID = EI)includes all standard
messages for an ARPA radar target data receive interface. Further it also contains a lot
proprietary messages supporting integrated navigation features such as user charts,
routes, curved EBL, etc.
3) Device interface FURUNO: IEC 61162-1 (TX Talker ID = EC) includes all standard
messages for an ARPA radar target data receive interface. Further it also contains a lot
proprietary messages supporting integrated navigation features such as user charts,
routes, curved EBL, etc.
4) Device interface IMO IEC 61162-1 ($xxOSD, $xxTTM) uses TTM message for ARPA
radar target data receive interface and OSD message for ARPA radar speed and course
receive. It sends standard ECGLL, ECDPT and ECMVW messages to the ARPA radar.
5) Device interface FURUNO: FAR-2x07 (serial) includes all standard messages for an
ARPA radar target data receive interface. Further it also contains a lot proprietary
messages supporting integrated navigation features such as user charts, routes, curved
EBL, etc
6) Device interface FURUNO: FAR-2x07 (LAN) includes all standard messages for an
ARPA radar target data receive interface. Further it also contains a lot proprietary
messages supporting integrated navigation features such as user charts, routes, curved
EBL, etc
In the Radar Display field you can select radar displays one by one and define if they are in
use, etc.
3. ADJUSTMENTS
3-23