4 Operation functions
4.1 Selection and opening / execution
4.2 Scrolling
Building Technologies
Fire Safety
The following chapters contain descriptions of important functions for directly
operating the ↑ site.
You will find information on the system functions in the corresponding chapter.
See also
1 System functions [➙ 111]
After calling up the main menu and any other list, the first entry in the list is
selected. The selection is indicated by a rectangular frame around the entry.
The opening of a list item or the execution of a list command is performed by
moving the cursor to the selected entry and pressing <ok>.
Other methods to open or execute a highlighted list entry are given by pressing the
following buttons:
●
<►>
●
<Number> on the numerical block (given number in brackets – only in selection
lists)
Changing the selection
The selection indicated is changed as follows:
Button
<▼>
<▲>
<More alarms>
<Number> + <ok>
More Options' + 'Jump to begin' softkeys Jump to the top of the list
More Options' + 'Jump to end' softkeys
See also
1 List representation and list types [➙ 171]
You can use the navigation keys to scroll through a displayed list in the display.
You can scroll to the start/end of the lists (limited function) and back in the
following lists:
●
Option lists
●
Command lists
●
Element category lists
In all other lists, you can scroll beyond the end of the list to the start of the list and
back.
Operation functions
Selection and opening / execution
Consequence
Next entry
Previous entry
Opens alarm list / jumps to the next
entry in the alarm list shown
Goes to the entry with the number
entered – not in selection lists
Jump to the end of the list
A6V10211076_i_en_--
4
35 | 184
2015-12-15