Changing Visibility; Deactivating Standby - Siemens FC7xx Operation Manual

Operation
5

Changing visibility

5.8 Changing visibility

5.8.1 Deactivating standby

60 | 184
Building Technologies
Fire Safety
See also
1 Visibility [➙ 118]
'PMI standby visibility' cannot be activated manually.
The 'Deactivate standby visibility' command is only available once the monitored
'Station' or the ↑ management station is back in normal operation.
ϖ The 'PMI standby visibility' is active.
ϖ The monitored 'Station' or the ↑ management station is in ↑ normal operation.
1. Select 'Main menu' > 'Message summary'.
 The message categories containing messages are displayed.
2. Select 'Information'.
 'PMI standby visibility' is shown.
3. Select this element.
4. Press <Execute Commands>.
5. Select 'Deactivate standby visibility'
 'PMI standby visibility' is deactivated.
See also
1 Standby visibility [➙ 119]
A6V10211076_i_en_--
2015-12-15