5.21 Setting up Cerberus Remote link with integrated IP
5.22 Operating Cerberus Remote
Building Technologies
Fire Safety
Situation and motivation
●
In addition to local connection, 'Cerberus-Remote' can be used to establish a
connection to a ↑ 'Station' using a network and IP address.
●
You might want to view various 'Stations' with 'Cerberus-Remote'.
●
We would recommend avoiding the repeated entering of IP addresses when
repeatedly establishing connections to 'Stations'.
Option
●
Execution of 'Cerberus-Remote' with additional parameters (IP address and
PIN).
●
Save modified program execution as link.
Procedure
ϖ Start Cerberus-Remote as its own application (FX2020) and not from the
corresponding task card in Cerberus-Engineering-Tool (FX2030).
1. Right-click the link in 'Start' > 'Siemens' > 'FX2020' > ... to go to the executable
'Cerberus-Remote' file and copy the link to the clipboard or an editor.
2. Add following parameters to program execution:
–
IP address for ↑ GAP.
–
Host ID for 'C-WEB'-'Station' to be viewed with 'Cerberus-Remote'.
–
PIN for 'Access level' 3.
Modified program execution with integrated IP is created.
Example:
C:\Program Files\Siemens\F-FX2020\XL_en_1-V2.1>F-FXS2009.exe"
-visualizer ip=192.168.200.1 host=1 pin=0000
Test program execution command using 'Start' > 'Execute'
κ
Creating link on desktop
1. Right-click on desktop and select 'New' > 'Link'.
2. Copy tested, modified program execution command to input field.
3. Confirm with 'Continue' and give link a name.
4. Click on 'Finish'
Link with modified program execution and integrated IP is set up.
You can operate Cerberus-Remote with the mouse or with the PC keyboard.
The operating functions of the keys shown are identical with those on the Station'.
Setting up Cerberus Remote link with integrated IP
Operation
5
99 | 184
A6V10211076_i_en_--
2015-12-15