5.10.1 Execute commands – General
Building Technologies
Fire Safety
Example for the execution of commands
1. Select a command category such as 'Function On/Off' by pressing the <softkey
1> in the 'Main menu' or the 'Functions' main menu item.
The pre-selection restricts the element category selection.
A list of all element categories on which a command of the 'On / Off'
command group can be executed is indicated.
2. Select an element category.
The 'Enter address' window is open.
3. Enter an address or leave the entry field blank and confirm with <ok>.
If no address is entered, all elements of the selected element category are
indicated.
4. In this case, select an element and press the 'Execute Commands' <softkey>.
The 'Select command' window is open.
5. Select a command.
The command is executed.
The tables below indicate the steps described above:
Main menu
Exit with <C>
(1)
Message
summary
(2)
Functions
(3)
Favorites
(4)
Topology
Function
On/Off
Press 'Function On/Off' <softkey 1>.
κ
Selecting element category
Area
↑ Section
Zone
Sounder
↑ Fire control group
Select for example 'Zone'.
κ
Enter address
Zone ---------
Confirm with <ok>/Exit with <C>
Delete with <Cursor up>
Confirm with <ok> without entering an address.
κ
Execute commands – Basics
Element search
Event memory
Login/logout
Settings/administration
Function
All
(1)
(2)
(3)
(4)
(5)
Operation
5
Access level 2.1
(5)
(6)
(7)
(8)
LED
test
63 | 184
A6V10211076_i_en_--
2015-12-15