Setup of the Person Machine Interface
3
PMI
6
Key switch (optional)
7
<Alarm device> button
8
System fault LED (yellow)
9
Operation LED (green)
A
<More alarms> button
S
Softkeys 1–3
X
<Silence buzzer>,
<Acknowledge>, <Reset>,
<Alarm delay off>, <Premises
manned> standard buttons
k1 Configurable keys with LEDs
k2 Configurable LEDs
20 | 184
Building Technologies
Fire Safety
●
An access level can be enabled with the key switch.
●
The accessible access level is configurable.
●
The key switch has two positions: On (horizontal position), Off
(vertical position)
●
Deactivates the ↑ alarm devices in the event of alarm (password
required)
●
Lights up yellow when a fault is present
●
Lights up green during operation
●
Pressing <More alarms> opens the 'ALARMS' event list.
●
If the 'ALARMS' event list is already open, <More alarms> assumes
the function of the button <▼>, changing to the next alarm event
upon activation.
●
Softkeys are buttons by means of which functions may be carried
out that are displayed in the three fields of the softkey line on the
display.
●
These three black fields contain the names of the functions in white
font.
●
The functions of the softkeys may change depending on the situation
and the contents of the display.
●
Always the most important functions are assigned to the softkeys 1
and 2.
●
<Silence buzzer> switches the buzzer off.
●
<Acknowledge> acknowledges all events that can be acknowledged.
Confirms presence (↑ AVC, IC). Switches off the buzzer and internal
sounders.
●
<Reset> resets all events that can be reset (password required).
●
<Alarm delay off> switches off the alarm delay for all events. In the
event of an alarm, the remote transmission or global alarming is
activated immediately.
●
<Premises manned> switches between 'Manned' and 'Unmanned'
operation modes (password required). Opens the event list in the
case of a "mixed" condition (↑ visibility on several ↑ areas with
different 'Manned' and 'Unmanned' settings).
●
These two keys may, for example, be configured with the following
functions: 'VdS counter' or 'Switch off detector zone' display.
●
Freely configurable for the indication of events or conditions
Inscription strips may be inserted to label the PMI.
You will find a template for this in document A6V10217440. See chapter
'Applicable documents'.
A6V10211076_i_en_--
2015-12-15