Soft Keys - Siemens FC7xx Operation Manual

3.4 Soft keys

Softkey / Option
'Show intervention text'
'Jump back'
'Execute command'
'More options'
'Show details'
2
'Lower level'
'Upper level'
'Jump to begin' / 'Jump to
end'
'Show topology '
3
'Show active detectors'
Building Technologies
Fire Safety
The figure below shows the part of the PMI including the softkeys.
Button for softkey function
Softkeys are buttons which you can use to carry out functions and which are
displayed in the three fields of the softkey line on the display. These three black
fields contain the names of the functions in white font.
The functions of the softkeys change dynamically depending on the situation and
the contents of the display.
Always the most important functions are assigned to the softkeys 1 and 2.
When the user navigates through the topology, the softkey allocation does not
change depending on the context; the assignment remains fixed. If a softkey
function cannot be executed at a point in the topology, the inscription in the field is
hidden.
The table below lists an exemplary softkey assignment.
Function
Shows the intervention text of the selected event.
1
Displays the list the selected event has been taken from. Back from the view
Intervention text or Details.
Opens the 'Select command' window.
Opens the 'Select option' window.
Shows details of the selected event or element.
Changes to the next lower hierarchy level.
Changes to the next higher hierarchy level.
Within a list, jumps to the top or end of the list
Jumps to the selected element in the topology.
Shows a list of all active detectors, corresponding to an event list.
Softkey / Option is only displayed when intervention text is available at this point
1
Softkey / Option only available in 'Access level 3'
2
Softkey / Option only available as of 'Access level 2.1'
3
See also
Setup of the Person Machine Interface
1 Normal view [➙ 26]
3
Soft keys
29 | 184
A6V10211076_i_en_--
2015-12-15