Siemens FC7xx Operation Manual page 50

Operation
5
Switching off / Switching on
50 | 184
Building Technologies
Fire Safety
Selecting option
Execute commands
Jump to link
Show details
Select 'Execute commands' option, continue with <ok>
κ
Select command
OFF
Activate alarm indicator
Deactivate alarm indicator
WARNING! System parts that have been switched off make it impossible to
κ
acquire and process alarms or faults! Select 'OFF' command
 Command response
Execute command
OFF
Command executed
Switching on the 'Detector'
Proceed in the same way as when ↑ switching off 'Detector', but select the 'ON'
command as shown below.
Select command
ON
Select 'ON' command
κ
As an alternative, you can select the corresponding detector or 'Zone' via the
'Message summary' main menu item and the 'Isolations' message category and
switch it back on with the 'More Options', 'Execute commands', and 'ON' softkey.
(3)
(4)
(5)
(1)
(3)
(4)
(2)
A6V10211076_i_en_--
2015-12-15