Siemens FC7xx Operation Manual page 46

Operation
5
Switching off / Switching on
46 | 184
Building Technologies
Fire Safety
↑ Switching off a detector zone
1. Select 'Main menu' > 'Functions'.
 The 'Functions' window is open.
2. Select 'On / Off'.
 A list of all element categories on which a command of the 'On / Off'
command group can be executed is indicated.
3. Select the 'Element category' 'Zone'.
 The 'Enter address' window is open.
4. Press <ok> without entering an address.
 All 'Zones' are displayed.
5. Select a 'Zone' and press <'Execute Commands>.
 The 'Select command' window is open.
6. WARNING! System parts that have been switched off make it impossible to
acquire and process alarms or faults! Select the 'OFF' command and confirm
with <ok>.
 The window with the command response confirms the selected command.
 'Zone' is switched off.
Exemplary representation of the aforementioned operation sequence for
↑ switching off a detector zone:
Functions
Exit with <C>
On / Off
Test
Activate / Deactivate
Information
Message summary
Select 'On / Off', continue with <ok>
κ
Selecting element category
Zone
Area
Section
Sounder
↑ Fire control group
Select 'Zone', continue with <ok>
κ
(1) Configuration
(2) Maintenance
(3) Reports
(4) All functions
Event memory
(1)
(2)
(3)
(4)
(5)
Access level 2.1
(5)
(6)
(7)
(8)
LED
test
A6V10211076_i_en_--
2015-12-15