Indication Of The Position And Length Of The List; Shortcut; Favorites - Siemens FC7xx Operation Manual

Operation functions
4

Indication of the position and length of the list

4.3 Indication of the position and length of the list

4.4 Shortcut

4.5 Favorites

36 | 184
Building Technologies
Fire Safety
There is a vertical bar along the side of a list when the list is longer than can be
indicated on the display.
The black part of the bar shows the position and size of the part of the list you can
see in relation to the entire list.
Examples for the representation in different lists:
1 Bar in normal view with list
See also
1 Event status identification [➙ 169]
A shortcut serves for the direct execution of an entry in a selection list by pressing
a numeric key.
In a command list, for example, you can execute a command directly by entering
the corresponding number.
The numbers for the shortcut are shown in the list entry line, on the right and in
brackets.
You can use favorites to execute several operation sequences or one operating
sequence in an operation sequence.
A maximum of 8 favorites are configured and you can select them from the favorite
list in the 'Favorites' main menu item.
2 Bar in window with list
A6V10211076_i_en_--
2015-12-15