Adjusting The Display Brightness; Setting Time And Date - Siemens FC7xx Operation Manual

Operation
5
Settings / Administration

5.27.4 Adjusting the display brightness

5.27.5 Setting time and date

106 | 184
Building Technologies
Fire Safety
You can set the display brightness on five levels between 'Off', 25 %, and 100 %.
'Change display brightness'
1. Select 'Main menu' > 'Settings/administration' > 'Display settings'.
 The 'Display settings' window is open.
2. Select 'Change display brightness'.
 The window for the adjustment is open.
3. Select the desired settings in the list.
 The display brightness has been adjusted.
You will have to reset the clock if the fire control panel has been de-energized. In
countries with central European summer time (CEST), the system clock
automatically switches between daylight savings time and regular time.
'Enter date / time'
1. Select 'Main menu' > 'Settings/administration' > 'System commands'.
 The 'System commands' window is open.
2. Select 'Set system time'.
 The 'Enter date / time' window is open.
3. Enter the date and time and/or confirm with <ok>.
 The cursor jumps to the next field and terminates the input after the last
field.
 Adjusted or confirmed date and time are set.
Enter date / time
25-04-09 12:42:58
(dd-mm-yy) (hh:mm:ss)
Confirm with <ok>/Exit with <C>
Delete with <Cursor up>
Table 5: Input window for time and date
A6V10211076_i_en_--
2015-12-15