Comtech EF Data CDM-425 Installation And Operation Manual page 505

Sect. 10.3.3.3.3.4 ODU: FSK-control  BUC
10.3.3.3.3.1 ODU: FSK-control  CSAT
The CSAT menus that follow assume that you have already selected, and the
system has identified, a (standalone) CSAT connected via the rear panel Rx IF
port.
When the following menu selections are made:
•
•
•
You are directed to a common submenu branch:
• CSAT-5060/050 V1.02
• Configuration
For clarity, this common submenu branch and its nested menus are defined in
this section. (CSAT#X denotes CSAT#1 or CSAT#2.)
Use the ◄ ►arrow keys to select Configuration, Monitor, Alarms, or Info, and then press
ENTER.
10.3.3.3.3.1.1 ODU: FSK-control  CSAT (2CSATs  CSAT #X)  Configuration
Configuration settings:
Use the ◄ ►arrow keys to select Tx, Rx, LNA, or Misc, and then press ENTER.
ODU (Transceiver, BUC, LNB) Operation

ODU: FSK-control CSAT

ODU: FSK-control 2CSATs

ODU: FSK-control 2CSATs
Tx Rx LNA
CDM-425 Advanced Satellite Modem

CSAT#1

CSAT#2
Monitor Alarms Info(
Misc ()
10–15
Revision 0

)
MN-CDM-425