Table of Contents
Advertisement
9.2
Telnet Command Line Interface (CLI)
In order to use the Telnet CLI to make configuration changes to the CDM-425,
Remote Access Mode should always be set to [Ethernet].
9.2.1
Telnet CLI Menu System – Parallel Functionality
The Telnet CLI allows monitoring, configuration, and control of the CDM-425 Satellite Modem in a
manner similar to functionality provided via its front panel menus and the CDM-425 Web Server
Interface. See those chapters for more in-depth explanations of operation.
•
Chapter 6. FRONT PANEL OPERATION
•
Chapter 7. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
Certain configuration menu selections (e.g., Carrier-in-Carrier) are functional
only when that FAST feature has been purchased and enabled for operation.
This chapter documents the CLI as if all available options are installed – your
configuration may or may not provide the level of functionality as described in
this chapter.
9.2.2
CLI Menus – Common Navigation and Operation Features
1. The CLI organizes operation under a hierarchy of Configuration and Information
functions. You may select a configuration submenu or information page (e.g.,
Administration, Statistics, etc.) from this top-level menu, either by typing in the bracketed
hot key that precedes the submenu name, or by using the ↑↓ arrow keys and pressing
ENTER. Each submenu provides nested dialog windows requiring further action.
2. The bottom of each "screen" shows the possible actions to take.
Home (Main) Menu page:
Submenu or nested pages (e.g., Administration, Statistics, etc.):
Dialog windows:
Telnet Command Line Interface (CLI) Operation
CDM-425 Advanced Satellite Modem
9–7
Revision 0
MN-CDM-425
Advertisement
Table of Contents
