Table of Contents
Advertisement
CDM-425 Advanced Satellite Modem
Revision 0
Hot Key [F] – D&I++ Table
The D&I++ Table dialog window shows the current value for the table. To edit the table value,
press A, and then enter a new value*. Press [ENTER] to accept the change or [ESC] to
return to the D&I dialog window. See CHAPTER 8. SERIAL-BASED REMOTE PRODUCT
MANAGEMENT, SECT. 8.5.5 Bulk Configuration Strings. Refer to this section for correct
syntax, see the DNI Command/Query Description of Arguments column.
Hot Key [G] – D&I Quad Table
The D&I Quad Table dialog window shows the current value for each table. To edit a table
value*, press A (Quad Drop And Insert Port 1), B (Quad Drop And Insert Port 2), C (Quad
Drop And Insert Port 3), or D (Quad Drop And Insert Port 4). See CHAPTER 8. SERIAL-
BASED REMOTE PRODUCT MANAGEMENT, SECT. 8.5.5 Bulk Configuration Strings.
Refer to this section for correct syntax, see the DNI Command/Query Description of
Arguments column.
Telnet Command Line Interface (CLI) Operation
9–36
MN-CDM-425
Advertisement
Table of Contents
