Comtech EF Data CDM-425 Installation And Operation Manual page 363

Advanced satellite modem (18 kbps – 25 mbps)
Table of Contents

Advertisement

Command
Length of
Parameter
(Instruction
Arguments
& Qualifier)
Radius
RAT=
1 byte,
Server
0 or 1
Password
Type
Radius
RAS=
Up to 64 bytes
Server Shared
Secret
Precision
PTU=
1 byte
Time Protocol
Transport
Mode
Precision
PTS=
15 bytes
Time Protocol
Unicast
Master
Precision
PTY=
2 bytes
Time Protocol
Unicast Sync
Interval
Port
PME=
1 byte
Monitoring
Enable
Port
PMS=
1 byte
Monitoring
Source Port
Serial Remote Control
Description of Arguments
Command or Query.
Sets or returns the RADIUS Server password type in the form x, where
0=PAP
1=CHAP
EXAMPLE: <0/RAT=0
NOTE: Parameter available only through Telnet CLI. Command available at Administrator level only.
Command or Query.
Sets or returns the RADIUS Server shared secret
EXAMPLE: <0/RAS=comtech
NOTE: Parameter available only through Telnet CLI. Command available at Administrator level only.
Command or Query.
Sets or returns PTP Transport Mode in the form x, where:
0=Multicast
1=Unicast
Command or Query.
Sets or returns the PTP Unicast Master IP Address in the form xxx.xxx.xxx.xxx.
Command or Query.
Sets or returns the PTP Unicast Master IP Address in the form xx, where:
-6= 64 Messages per second
-5= 32 Messages per second
-4=16 Messages per second
-3=8 Messages per second
-2=4 Messages per second
-1=2 Messages per second
+0=1 Message per second
+1=1 Message every 2 seconds (default value)
Command or Query.
Sets or returns port monitoring in the form x, where:
0=Disabled
1=Enabled
NOTE: MAC Learning must be enabled to monitor properly.
EXAMPLE: <0/PME=0
Command or Query.
Sets or returns the port monitoring source (monitoring) port in the form x, where:
1=Port 1
2=Port 2
3=Port 3
4=Port 4
5=WAN
NOTES:
1) Source port and destination port must be different.
2) WAN (5) monitors Packet Processor traffic if it presents.
EXAMPLE: <0/PMS=1
8–39
CDM-425 Advanced Satellite Modem
Revision 0
Query
Response to
(Instruction
Response to Query
Command
& Qualifier)
RAT=
RAT?
RAT=x
RAT?
(see Description of
RAT*
Arguments)
RAT#
RAS=
RAS?
RAS=xxx...
RAS?
(see Description of
RAS*
Arguments)
RAS#
PTU=
PTU?
PTU=x
PTU?
(see Description of
PTU*
Arguments)
PTU#
PTS=
PTS?
PTS=xxx.xxx.xxx.xxx
PTS?
(see Description of
PTS*
Arguments)
PTS#
PTY=
PTY?
PTY=xx
PTY?
(see Description of
PTY*
Arguments)
PTY#
PME=
PME?
PME=x
PME?
(see Description of
PME*
Arguments)
PME#
PMS=
PMS?
PMS=x
PMS?
(see Description of
PMS*
Arguments)
PMS#
MN-CDM-425

Advertisement

Table of Contents
loading

Table of Contents