Table of Contents
Advertisement
PTP Status
Click [Refresh] to update this section with its most recently accumulated statistics.
These status parameters are read-only and cannot be changed. Note the following:
Row Title
(from top)
PTP Offset
LAN State
WAN State
PTP Statistics
Click [Refresh] to update the page with the latest available statistics.
Click [Clear] to clear all PTP statistics from the buffer.
Ethernet-based Remote Product Management
Displays the offset, in seconds, between the modem's slave clock and its master.
Displays the state for the clock on the LAN side:
The State displays as "Slave" when Grandmaster is set to LAN port using the
•
'Configuration | ANT | PTP' page (see Sect. 7.5.4.3.11.1).
The State displays as "Master" when Grandmaster is set to WAN port using the
•
'Configuration | ANT | PTP' page (see Sect. 7.5.4.3.11.1).
Displays the state for the clock on the WAN side:
The State displays as "Slave" when Grandmaster is set to LAN port using the
•
'Configuration | ANT | PTP' page (see Sect. 7.5.4.3.11.1)
The State displays as "Master" when Grandmaster is set to WAN port using the
•
'Configuration | ANT | PTP' page (see Sect. 7.5.4.3.11.1).
CDM-425 Advanced Satellite Modem
Description
7–91
Revision 0
MN-CDM-425
Advertisement
Table of Contents
