To store (save) a configuration setting:
•
First, make any desired configuration changes to the modem.
•
Next, open the Save Modem
Configuration window (Home >
[A] Administration > [G] Save
Modem Configuration). Note the
Configuration slots listed in the
window, and then press [A] Save
to Slot. The nested dialog
window opens:
•
Then, enter 0 through 9, and then
press [ENTER] to accept the
selection.
•
Finally, press [F8] to save (store) the configuration. Wait while the configuration is stored into
memory.
Once a modem configuration is stored into the designated slot, the time and date are recorded,
and this information appears on the configuration slot line.
To load (recall) a configuration setting:
•
First, open the Load Modem
Configuration window (Home >
[A] Administration > [H] Load
Modem Configuration). Note the
saved configuration slots listed in
the window, and then press [A]
Load from Slot. The nested
dialog window opens:
•
Then, enter 0 through 9, and
press [ENTER] to accept the
selection.
•
Finally, press [F8] to load (recall) the configuration. Wait while the configuration is loaded
from memory.
Telnet Command Line Interface (CLI) Operation
CDM-425 Advanced Satellite Modem
9–22
Revision 0
MN-CDM-425