Display And Operation Sections - Mitsubishi Electric MR-JE-_A Instruction Manual

4. STARTUP

4.5 Display and operation sections

4.5.1 Summary
The MR-JE-A servo amplifier has the display section (5-digit, 7-segment LED) and operation section (4
pushbuttons) for servo amplifier status display, alarm display, parameter setting, etc. Push the "MODE" and
"SET" buttons at the same time for 3 s or more to switch to the one-touch tuning mode.
The operation section and display data are described below.
MODE Display mode change
Low/High switching
Display/data scrolling (UP)
Display/data scrolling (DOWN)
SET Display/data determination
Data clear
AUTO To the one-touch tuning mode
5-digit, 7-segment LED
Decimal LED Displays the decimal points, alarm presence/absence, etc.
Decimal
4 - 18
Displays data.
Lit to indicate the decimal point.
Lit to indicate a negative when "-"
(negative) cannot be displayed.
Blinks to indicate alarm occurrence.
Blinks to indicate the test operation
mode.