Changing Windows Nt Boot Selections; Using The Windows Nt Boot Menu - Compaq AlphaServer 1000A Owner's Manual

Basic Operation

Changing Windows NT Boot Selections

The Windows NT firmware uses boot selections to locate the operating system files.
When the system is shipped, the default boot selection identifies the system disk as the
location of the operating system files. Thus, the system boots from the system disk. You
can set alternative boot selections if, for example, you want to boot the operating system
from a different device.

Using the Windows NT Boot Menu

Example 4-7 shows the Windows NT Boot menu.
Example 4–7: Windows NT Boot Menu
Alpha Firmware Version n.nn
Copyright (c) 1993-1995 Microsoft Corporation
Copyright (c) 1993-1995 Digital Equipment Corporation
Boot menu:
Boot the default operating system
Boot an alternate operating system
Run a program
Supplementary menu...
Use the arrow keys to select, then press Enter.
4-24 AlphaServer 1000A Rackmount Owner's Guide