Table of Contents
Advertisement
__________________________ Note_____________________________
Switch back to the Windows NT (ARC) console before you boot the Windows
NT operating system
____________________________________________________________
Digital UNIX or OpenVMS Alpha Systems
Use these SRM console commands to verify system configuration for Digital UNIX or
OpenVMS Alpha systems.
show config
show device
show memory
set and show
Booting Windows NT
When the system ships with the Microsoft Windows NT operating system, the system
default settings cause the system to boot from the system disk automatically after it
successfully completes the startup tests. However, the system counts down for 10 seconds
after it displays the Boot menu before booting. You can stop the system from booting
before this time limit expires by choosing another menu item using the up or down arrow
key.
You can change these system default settings. For example, you can cause the system to
halt at the Windows NT firmware Boot menu after the startup tests, or you can increase
the countdown time limit.
Displays the buses on the system and the devices found on
those buses
Displays the devices and controllers in the system
Displays main memory configuration
Set and display environment variable settings
AlphaServer 1000A Rackmount Owner's Guide 4-23
Basic Operation
Advertisement
Table of Contents
Troubleshooting
