Srm Console Configuration Commands - Compaq AlphaServer 1000A Owner's Manual

Configuring Your System
EISA slot information:
Slot
0
0
__________________________Notes ____________________________
For a more complete listing of the options recognized by your system, see the
next section, "SRM Console Configuration Commands."
To enter Digital UNIX and OpenVMS Alpha console commands, you must
switch to the SRM console (see, "When to Switch Consoles," in Chapter 4,
"Basic Operation").
Remember to switch back to the Windows NT (ARC) console before booting the
Windows NT operating system.
____________________________________________________________

SRM Console Configuration Commands

The following console commands are used to verify system configuration on systems
running either the Digital UNIX or OpenVMS Alpha operating system:
show config
show device
show memory
set and show
6-4 AlphaServer 1000A Rackmount Owner's Guide
3/12/1996
Tuesday
Device Identifier
Other DEC5000
Disk Floppy
Displays the buses on the system
and the devices found on those
buses.
Displays the devices and
controllers in the system.
Displays main memory
configuration.
Set and display environment
variables.
9:06:23 AM