Figure 5-7: Installing Or Removing An Option Card - Compaq AlphaServer 1000A Owner's Manual

2. Remove the screw securing the slot cover to the chassis.
3. Remove the slot cover from the system unit and store it for future use.
4. Carefully install the option card into the appropriate connectors on the system board
and press it firmly into place.
5. Secure the option card to the chassis using the screw you removed.
6. When you finish removing or installing internal options, reassemble the system
following the procedure described in "Replacing the Top Panel" earlier in this chapter.
7. Test the option card installation (see the section, "Testing an Option Card Installation"
later in this chapter).

Figure 5-7: Installing or Removing an Option Card

1
Installing and Removing Components
2
AlphaServer 1000A Rackmount Owner's Guide 5-11
1 Option card
2 Slot cover screw
MLO-011585