Installing and Removing Components
14. Reach in behind the power supply from the top of the workstation and
unplug the ac connector.
15. Install the replacement power supply by repeating the above steps in reverse
order.
__________________________ Note _____________________________
To ensure that the power supply is seated properly, slide it until it rests up
against the center brace of the workstation.
____________________________________________________________
Figure 5-11: Installing the Power Supply
1
5-20 AlphaServer 1000A Rackmount Owner's Guide
4
2
MLO-011560
3
1. Protective
shield screws
2. Internal
screws (2)
3. Ground screw
4. Power supply
position