Show Sntp; Enable Sntp - D-Link DGS-3100 SERIES Cli Manual

DGS3100# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 60
Success.
DGS3100#

show sntp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DGS3100#show sntp
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DGS3100#

enable sntp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DGS3100# enable sntp
Success.
DGS3100#
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
To display the SNTP information.
show sntp
The show sntp command displays SNTP settings information,
including the source IP address, time source and poll interval.
None.
None.
: System Clock
: Disabled
: 10.1.1.1
: 30 sec
To enable SNTP server support.
enable sntp
The enable sntp command enables SNTP server support. SNTP
service must be separately configured (see config sntp). Enabling
and configuring SNTP support override any manually configured
system time settings.
None.
Only administrator and Operator-level users can issue this
command. SNTP settings must be configured for SNTP to function
(config sntp).
144