Digital Input Module - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15

10.6.4 Digital Input Module

Description
Electrical Connection
Supply Voltage
Power Consumption
Power Dissipation
Field Terminals (TB1–TB4) Ratings
EOL (End Of Line) Resistance
INL (In–Line) Resistance
Switch Input Device supply Voltage (Vs)
Switch Input Device supply Current (Is)
Connector Coding
10.6.5 Relay Output Module
Description
Electrical Connection
Supply Voltage (Vs)
Auxiliary Supply Voltage
Auxiliary Supply Current
Power Consumption
Power Dissipation
Relay Contacts (TB1–TB4)
Connector Coding
10. Specifications
4-channel Digital Input Module for switched input devices
4 x two-wire Switch Inputs
18 – 32 VDC (Supplied from Self Enclosed Low Voltage source only)
2.8 W maximum (no inputs connected)
2.8 W maximum
Maximum current of 14 mA through switched input device at 18 – 32 VDC
10 kΩ, 0.25 W, ±1%
2.7 kΩ, 0.25 W, ±1%
Minimum 15 V Maximum 32 V
Minimum 5 mA for Supervised OC/SC Switch ON condition
Maximum 14 mA for Unsupervised Switch ON condition
Digital Input Module connectors (TB1–TB4) have coding keys to avoid incorrect wiring
4–channel Relay Output Module incorporating 4 single pole change over (SPCO) relays and
24 VDC Auxiliary Power Output
4 x SPCO Relay Terminals (TB1 to TB4)
4 x two-wire Auxiliary Output Terminals (TB5 to TB8)
18 – 32 VDC (Supplied from Self Enclosed Low Voltage source only)
Supply Voltage (Vs) – 0.7 V
Maximum 1.5 A
Maximum 1.5 W (excluding auxiliary power consumption)
Maximum 2.3 W
Maximum 5 A through one relay contact at 250 VAC / 30 VDC (non–inductive)
Maximum 8 A total through all four relay contacts at 250 VAC / 30 VDC (non–inductive)
Minimum 12 VDC, 10 mA
Relay output connectors (TB1–TB4) and auxiliary output connectors (TB5–TB8) have coding
keys to avoid incorrect wiring. The relay output connectors (TB1–TB4) are coloured black to
identify them for AC supply wiring
154
Touchpoint Pro
Operating Instructions