Certification - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15
11.1 EC declaration of conformity
A full EC declaration of conformity is available on the CD accompanying the product. This document lists
the European Standards with which the Touchpoint Pro complies.
Only the combustible gas detection portion of this instrument has been assessed for performance
Seulement la partie détection de gaz explosif de cet équipement a fait l'objet de tests de
CSA performance is only valid when connected to Honeywell Model 705 Catalytic Gas Detectors
La performance en conformité avec la CSA est valide uniquement lorsque l'appareil est connecté
aux détecteurs de gaz catalytiques Honeywell modèle 705 ou à des détecteurs de gaz 4 - 20 mA
11.2 Applicable National and International Standards
The Touchpoint Pro systems described in this manual are declared to conform to the following National and
International Standards when installed and operated in accordance with the Manufacturer's specifications
and stipulations:
Ordinary Location Standards
CAN/USA – C22.2 No. 61010-1
CSA 22.2 No. 152
UL Std – No. 61010-1
EN/IEC 61010-1
FM 6310 & 6320

11. Certification

WARNING
in accordance with the ATEX Directive.
AVERTISSEMENT
performance métrologique suivant la directive ATEX.
WARNING
or suitably approved 4 – 20 mA Gas Detectors.
AVERTISSEMENT
dûment approuvés.
Zone 2 Div. 2 Hazardous Location Standards
ANSI/ISA –12.12.01
CAN/CSA C22.2 No. 60079-0
CAN/CSA C22.2 No. 60079-15
CSA C22.2 No. 0-M
CSA C22.2 No. 213-M
EN/IEC 60079-0
EN/IEC 60079-15
UL 60079-0
UL 60079-15
FM 6310 & 6320
155
Touchpoint Pro
Operating Instructions