Touchpoint Pro Ups Module With Backup Battery - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15
2. Overview / Introduction

2.9.3 Touchpoint Pro UPS Module with Backup Battery

The UPS Module can be used in combination with the separate Touchpoint Pro Battery Box to protect
against failure of the AC supply, as shown below:
AC
The Battery Box contains a pair of 12 V sealed lead acid batteries, with either 12 Ah or 27 Ah capacity.
Note: The UPS Module requires an input supply voltage of 26 - 32 Vdc.
DC
24V 24V
Power DC-UPS
Supply
Figure 2.7 UPS and Battery Backup configuration
12V
Battery
12V
Battery
26
Touchpoint Pro
Operating Instructions
DC
24V
Load