Din Rail (Module Supply And Communication) - Honeywell touchpoint Pro Operating Instructions Manual

MAN0923_Issue 3_04/15

10.4.2 DIN Rail (Module Supply and Communication)

Description
Total Width
Type
Power Rating
10.4.3 Ring Coupling Module (RCM)
Description
Electrical Connection
Supply Voltage
Power Consumption
Power Dissipation
Ring Network Cable
Operating Conditions
Storage Temperature
Environmental Protection Class
Connector Coding
10.4.4 Backplane
Description
Electrical Connection
Maximum Wire Size
Supply Voltage
Backplane current Rating
Power Supply Connector Rating
Backplane connector
Environmental Protection Class
Operating Conditions
Storage Temperature
10. Specifications
5, 7, 9 or 10-way Communication / Power Rail consists of 1 DIN Rail, 1 Ring Coupling Module (RCM),
and a 5, 7, 9 or 10-way Backplane
430 mm
TS–35/15
18 – 32 VDC (Supplied from Self Enclosed Low Voltage source only)
Module for connection of DIN Rail mounted I/O modules to Ring Network
2 x Ring Network TX / RX Driver Pairs (Each two-wire plus Drain)
18 – 32 VDC
Maximum 1 W
Maximum 1 W
Minimum 2 x 2 x 1mm2 twisted pair, plus Drain and Overall Screen
–40°C to +70°C, 10 to 90 %RH (non–condensing)
–40°C to +70°C
Equipment Class III, Installation Cat 2, Pollution Degree 2
Ring cable connectors (TB1–TB4) have coding keys to avoid incorrect wiring
5, 7, 9 and 10 I/O slot (excluding first slot reserved for RCM) backplane PCB for providing power and
Ring Network connections to the RCM and I/O modules
Two-wire (+V and –V) at Power Supply Input for 5, 7, 9 I/O Slot Backplane
2 x two-wire (+V and –V) at Power Supply Input for 10 I/O Slot Backplane
10–pin backplane connector for connection to RCM and I/O Modules
6 mm2
18–32 VDC
Maximum 20 A
Maximum 32 V, 41 A
Maximum 32 V, 4.04 A
Equipment Class III, Installation Cat 2, Pollution Degree 2
–40°C to +70°C, 10 to 90 %RH (non–condensing)
–40 °C to +70 °C
149
Touchpoint Pro
Operating Instructions