Documents; Document Requirements; Scannable Area - Oki MC361dn User Manual

 Using the Faceup Stacker
Delivers paper with the print side face up.
Note
 The faceup stacker is not available in duplex printing.
Pull the faceup stacker on the rear side
1
of the machine and open it toward you.
Unfold the faceup stacker.
2
Open the paper support.
3

Documents

You can use the auto document feeder (ADF) or
the document glass to load documents for
copying, scanning or faxing.

Document Requirements

You cannot load the following documents on the
ADF. Use the document glass instead:
 Torn or perforated paper
 Curled or rolled paper
 Wet paper
 Static paper
 Carbon-backed paper
 Fabrics, metallic sheets or Transparency films
 Paper with staples, paper clips, ribbons, or tape
 Pasted paper, paper with glue
 Glossy paper
 Specially coated paper
Keep the followings in mind to avoid damaging
the document glass:
 Do not hold a document firmly on the glass when
copying a thick document.
 Place hard documents gently.
 Avoid loading documents with sharp projections.

Scannable Area

The text or images on the shaded area shown
below are not scanned.
2 mm
Memo
 The arrow in the above drawing indicates the feeding
direction in the auto document feeder, or the scanning
start side on the document glass.
- 71 -
Loading Paper and Documents
2 mm
2 mm
2 mm
1