Oki MC361dn User Manual page 29

 Using QWERTY Keyboard
(MC561dn only)
You can also use the QWERTY keyboard to enter
alphanumeric characters and symbols in the
entry screen.
The keyboard enables you to switch the entry
mode to the standard mode, CAPS mode, or
CTRL mode. The changed mode is reflected to
the screen keyboard display.
 Standard mode
It enables you to enter small alphabetical letters.
The following screen keyboard is displayed.
 CAPS mode
Pressing the <CAPS> key enables you to enter
capital alphabetical letters.
The following screen keyboard is displayed.
 CTRL mode
Pressing the <CTRL> key enables you to enter
symbols.
The following screen keyboard is displayed.
Note
 When the QWERTY keyboard cover is open, the numerical
keypad can only be used for entering numbers.
Deleting the Entered Text
You can delete text in the text field in the
following ways.
 Pressing the <CLEAR> key
Press the <CLEAR> key to delete the last
character entered.
Hold the <CLEAR> key to delete all the
characters you have entered.
 Selecting [BS] on the Screen Key-
board
Press the and
then press to delete the last character
OK
entered.
 Pressing the Backspace Key on the
Qwerty Keyboard (for MC561dn
Only)
Press the backspace key to delete the last
character entered.
- 29 -
Operator Panel
and to highlight [BS] and
1