Configuring The Tray Settings - Oki MC361dn User Manual

Insert the paper with the print side face
5
up until its edge touches the paper feed
entrance.
Note
 Do not load paper above the fill line (1).
Press the Set button (2).
6
Register the loaded paper on your machine.
Proceed to "Configuring the Tray Settings".
Note
 Do not load paper of different sizes, types or weights at
the same time.
 When adding paper, remove the paper on the MP tray and
straighten the edges of both stacks of paper, and then load
them again.
 Do not put anything other than paper for printing.
Memo
 When loading envelopes on the MP tray, load them face up
with the orientation as stated below.
- You envelopes (Monarch, Com-9, Com-10, DL and C5)
are loaded with the flap folded and the flap should come
to the right side to the feeding direction.
 Configuring the Tray Settings
After you load paper in tray 1, tray 2 (optional),
or the MP tray, you need to register the loaded
paper on your machine.
Press the <SETTING> key on the
1
operator panel.
Press the
2
then press
1
Press the
3
which you loaded paper and then 
press
Press the
4
then press
2
Press the
5
loaded paper and then press
 If [Custom] is selected for [Paper Size], you need to
Press the
6
then press
Press the
7
loaded and then press
Press the
8
and then press
Press the
9
loaded paper and then press
Press the
10
displayed.
- 69 -
Loading Paper and Documents
to select [Paper Setup] and
.
OK
to select the paper tray in
.
OK
to select [Paper Size] and
.
OK
to select the size of the
Reference
register the custom size. For how to register the
custom size, refer to "Registering Custom Sizes" P. 70.
to select [Media Type] and
.
OK
to select the type of media
to select [Media Weight]
.
OK
to select the weight of the
until the top screen is
.
OK
.
OK
.
OK
1