Oki MC361dn User Manual page 146

Other Troubles
Item
Web Driver Unable to find a machine.
Installer
Unable to access the machine from a remote
computer.
Restrictions on Mac OS X 10.6
Item
TWAIN driver Unable to scan by image capture.
Restrictions on Mac OS X 10.5
Item
TWAIN driver Unable to scan by image capture.
Symptom
Symptom
Symptom
- 146 -
Cause/Remedy
If the [Don't allow exceptions] check box is
selected on the [General] tab of Windows
Firewall, you cannot search for a machine in a
segment that is connected to another router.
Only machines within the same segment as
the machine are the search target.
Enter "*" in the fourth digit of the IP address
range to search.
Click [start] and then select [Operator
panel] > [Security Center] > [Windows
Firewall].
Select the [Exception] tab and click [Add
Port]. Add the port number of the web site on
which Driver Installer is installed.
Click [start] and then select [Operator
panel] > [Performance and Maintenance]
> [Administrative Tools].
Double-click [Component Services] and
change the access authority of the component
for Driver Installer.
For details on how to configure the settings,
refer to the readme file stored in [start] > [All
Programs] > [Okidata] > [Driver Installer]
> [Readme].
Cause/Remedy
 Scan is available only when the computer is
connected by USB.
 In the image capture, the user interface of
TWAIN driver is not displayed. Use the user
interface of the image capture and then
scan data.
Cause/Remedy
In the image capture, if the computer is con-
nected to the network, display the user inter-
face of the TWAIN driver before using.
To display the user interface of the TWAIN
driver, after starting the image capture, select
[Browse Devices] from the [Devices] menu
of the image capture and then open the
device browser. Select a driver and click use
[Use TWAIN UI].