Registering Network Scan Destinations - Oki MC361dn User Manual

Registering Network Scan Destinations


This section explains how to register a PC connected to the Network.
You can register locations on a network to which you can scan documents.
Memo
 You can also register network-connected PCs with ActKey in Network Configuration. You can register network-connected PCs
with Network Configuration, however, you cannot edit or delete them. For details, refer to User's Manual Advanced.
Registering and Editing
Reference
 For details on how to enter text, refer to "Entering Text
Using the Operator Panel" P. 27.
Press the <SETTING> key on the
1
operator panel.
Press the to select [Network Scan
2
Destination] and then press
Press the to select an IP address or
3
domain name and then press
Make sure that [Register] is selected
4
and then press
OK
If editing registered numbers, select [Edit].
Make sure that [Destination] is selected
5
and then press
OK
Enter a destination.
6
A destination up to 16 characters.
Select [Enter] and then press
7
Press the to select [Destination
8
Address] and then press
Enter an IP address or a Host PC name.
9
An IP address or a name up to 64 characters.
Select [Enter] and then press
10
Press the to select [Port No.] and
11
then press .
Enter a port number and then press
12
Press .
13
OK
Press the until the top screen is
14
displayed.
.
OK
.
OK
.
.
.
OK
.
.
OK
OK
Registering Network Scan Destinations
Deleting
Press the <SETTING> key on the
1
operator panel.
Press the
2
Destination] and then press
Press the
3
press .
OK
Press the
4
press .
OK
Press the
5
confirmation screen and then press
Press the
6
displayed.
.
- 107 -
to select [Network Scan
.
OK
to select a number and then
to select [Delete] and then
or to select [Yes] on the
until the top screen is
4
.
OK