Oki MC361dn User Manual page 135

Error
code
Memory Overflow.
Please see Help for details.
to close
OK
Off Line Mode.
Error Messages for Scanning
The following messages are displayed on the display screen while using the scan function.
Error
code
Cancelling.
Cancelling transmission.
Memory Overflow.
Please see Help for details.
to close
OK
USB Memory Full.
Please see Help for details.
to close
OK
Writing Failed.
Please see Help for details.
to close
OK
USB Memory disconnected.
Please see Help for details.
to close
OK
Connect to PC failed.
Please see Help for details.
to close
OK
Message
Message
<Status>
key
Blinks The memory overflowed while receiving PC fax
data.
Ensure the memory capacity by any of the
following operations.
 if the time specification for fax transmission is
set, cancel it.
 Delete documents stored in F-code box.
Or this message may be displayed when an error
occurs in the machine. Release the error.
If the error is not resolved, reduce the data to be
transmitted as PC Fax.
Lights up The machine is off line and cannot print received
fax data.
Press the <PRINT> key on the operator panel
and then select [Online/Offline] on the print
menu screen.
<Status>
key
Lights up A ScanTo job is being cancelled.
Lights up An e-mail or file transmission is being cancelled.
Blinks The memory overflowed while scanning data.
Blinks The USB memory is full and cannot store data.
Delete unnecessary files from the USB memory,
or use a USB memory with enough available
space.
Blinks Writing to the USB memory failed.
Remove the write-protection of the connected
USB memory.
Blinks USB memory is not connected to the machine
and the machine cannot store data.
Be sure that the USB memory is connected to
the machine properly.
Blinks The machine failed to connect to a PC.
Be sure that the machine is connected to the PC
properly.
- 135 -
Error Messages
Cause/Remedy
Cause/Remedy
7