AXIOMTEK SHB101 User Manual page 80

Intel core 2 quad/core 2 duo celeron processor picmg 1.3 full-size single board computer

Hide thumbs Also See for SHB101:

Table of Contents

SHB101 LGA775 SBC User's Manual

(5)

Installing the SATA controller driver during the OS installation

Now, the SATA driver disk is ready, and BIOS settings configured, you can proceed to

install Windows 2000/XP onto your SATA hard drive using the SATA driver. Here is an

example for Windows XP installation.

(5)-1 Restart your system to boot the Windows 2000/XP Setup disk, and press F6 butoon

button as soon as you see the message "Press F6 if you need to install a 3rd party

SCSI or RAID driver". After pressing the F6 button, there will be a few moments for

some files being loaded before next screen appears.

(5)-2 When you see the screen below, insert the floppy disk containing the SATA driver and

press "S".

Configuring SATA for RAID Function

Table of Contents