AXIOMTEK SHB101 User Manual page 47

Intel core 2 quad/core 2 duo celeron processor picmg 1.3 full-size single board computer

Hide thumbs Also See for SHB101:

Table of Contents

SHB101 LGA775 SBC User's Manual



Super IO Device

Scroll to this item and press <Enter> to view the sub menu Super IO Device.

Onboard FDC Controller

Select Enabled, if your system has a floppy disk controller (FDC) installed on the system board

and you want to use it. If you install and-in FDC or the system has no floppy drive, select

Disabled in this field. Options: Enabled and Disabled.

Onboard Serial Port 1 / 2

Select an address and corresponding interrupt for the serial port. Options: 3F8/IRQ4,

2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

Onboard Parallel Port

This item allows you to determine the I/O address for onboard parallel port. Options:

378H/IRQ7, 278H/IRQ5, 3BC/IRQ7 and Disabled.

Parallel Port Mode

Select an operating mode for the onboard parallel (printer) port. Select Normal unless your

hardware and software require another mode in this field. Options: EPP1.9, ECP, SPP,

ECPEPP1.7, EPP1.7.

EPP Mode Select

Select EPP port type 1.7 or 1.9 EPP Mode Select

Select EPP port type 1.7 or 1.9

ECP mode Use DMA

Select a DMA channel for the parallel port while using the ECP mode.

PWRON After PWR-Fail

This item enables your computer to automatically restart or return to its operating status.

Press <Esc> to return to the Integrated Peripherals page.

PHOENIX-AWARD BIOS Utility

Table of Contents