1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Motherboard
  5. SHB103 Series
  6. User manual

AXIOMTEK SHB103 Series User Manual

Intel socket 1156 core i7 / core i5 /core i3 / pentium processor atx industrial motheroard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
SHB103 LAG1156 Full-Size SBC User's Manual
SHB103 Series
™
™
®
Intel
Socket 1156 Core
i7 / Core
i5 /
™
®
Core
i3 / Pentium
Processor
ATX Industrial Motheroard
User's Manual
i

Advertisement

Table of Contents
loading

Related Manuals for AXIOMTEK SHB103 Series

Summary of Contents for AXIOMTEK SHB103 Series

  • Page 1 SHB103 LAG1156 Full-Size SBC User’s Manual SHB103 Series ™ ™ ® Intel Socket 1156 Core i7 / Core i5 / ™ ® Core i3 / Pentium Processor ATX Industrial Motheroard User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval...

  • Page 3: Esd Precautions

    Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. AMI are trademarks of American Megatrend Inc.

  • Page 4: Table Of Contents

    SHB103 LAG1156 Full-Size SBC User’s Manual Table of Contents ESD Precautions .................. iii CHAPTER 1....................1 INTRODUCTION ..................1 Specifications..............2 Utilities Supported ............. 4 I/O Bracket ................5 CHAPTER 2....................6 JUMPERS AND CONNECTORS..............6 Board Dimensions ............. 6 Board Layout..............
  • Page 5 SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.16 External USB Port Connectors (USB1, USB2)....21 2.4.17 DB15 CRT Connector (CN23).......... 21 2.4.18 Display Port Connector (CN24) ........22 CHAPTER 3....................23 HARDWARE INSTALLATION..............23 Installing the Processor ..........23 Installing the Memory ............33 CHAPTER 4....................
  • Page 6 SHB103 LAG1156 Full-Size SBC User’s Manual iAMT SETTINGS ..................91 Entering MEBx ..............91 Set & Change Password..........92 ® Intel iAMT Settings ............94 iAMT Web Console............99 APPENDIX E .................... 101 PICMG v1.3 INTERFACE DEFINITION............ 101 Introduction...

  • Page 7: Chapter 1

    SHB103 LAG1156 Full-Size SBC User’s Manual CHAPTER 1 INTRODUCTION The SHB103 PICMG 1.3 full-size Single Board Computer supports LAG1156 socket for Intel® Pentium® Desktop Processor(G6950), Intel® Core™ i3 Desktop Processor, Intel® Core™ i5 Desktop Processor, Intel® Core™ i7-800 series Desktop Processor with 32/45nm technology and Transfer Rate 1066/1333 MHz.

  • Page 8: Specifications

    SHB103 LAG1156 Full-Size SBC User’s Manual Specifications Intel® Pentium® Desktop Processor(G6950), Intel® Core™ i3 Desktop Processor, Intel® Core™ i5 Desktop Processor, Intel® Core™ i7-800 series Desktop Processor System Chipset ® Intel CPU Socket LAG1156 Socket DRAM Transfer Rate 1066/1333 MHz BIOS AMI BIOS via SPI interface with socket System Memory...
  • Page 9 SHB103 LAG1156 Full-Size SBC User’s Manual VGA Controller ® ® Chipset -- Intel integrated Graphics Gen5 on Intel supports 3D, 2D, video capabilities ® Memory Size -- Intel DVMT 5.0 supported; preallocated memory for frame buffer option as OS option: 1.

  • Page 10: Utilities Supported

    SHB103 LAG1156 Full-Size SBC User’s Manual Audio ® 10-pin 2.54 pin-header (Intel HD Audio Digital Header) Hardware Monitoring Monitoring temperatures, voltages, and cooling fan status Watchdog Timer Reset Supported (1-255 level) Dimensions 338mm x 126mm NOTE All specifications and images are subject to change without notice.

  • Page 11: I/O Bracket

    SHB103 LAG1156 Full-Size SBC User’s Manual I/O Bracket Introduction...

  • Page 12: Chapter 2

    SHB103 LAG1156 Full-Size SBC User’s Manual CHAPTER 2 JUMPERS AND CONNECTORS Board Dimensions Jumpers and Connectors...

  • Page 13: Board Layout

    SHB103 LAG1156 Full-Size SBC User’s Manual Board Layout Jumpers and Connectors...

  • Page 14: Jumper Settings

    SHB103 LAG1156 Full-Size SBC User’s Manual Jumper Settings Proper jumper settings configure the SHB103 to meet your application purpose. 2.3.1 COM1 Mode Select Jumpers for RS-232/422/485 (JP2, JP3, JP4) These jumpers select the COM1 port’s communication mode to operate RS-232 or RS-422/485. Description Function Jumper Setting COM1...

  • Page 15: Cmos & Rtc Clear Jumper (Jp8)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.3.2 CMOS & RTC Clear Jumper (JP8) You may need to use this jumper is to clear the CMOS memory if incorrect BIOS settings. Description Function Jumper Setting Normal CMOS & (Default) RTC Clear Clear CMOS Clear...

  • Page 16: Cpu Frequency Jumper (Jp5)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.3.4 CPU Frequency Jumper (JP5) Description Function Jumper Setting 133MHz CPU Clock (Default) 100MHz 2.3.5 ME Disable/Enable Jumper (JP7) Description Function Jumper Setting Enable ME Disable/ (Default) Enable Disable ME in Manufacturing Mode Jumpers and Connectors...

  • Page 17: Tpm Disable/Enable Jumper (Jp6, Jp10)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.3.6 TPM Disable/Enable Jumper (JP6, JP10) Description Function Jumper Setting Enable (Default) Disable/ Enable Disable 2.3.7 Audio Amplifier Jumper (JP1) Description Function Jumper Setting Disable Audio (Default) Amplifier Enable Jumpers and Connectors...

  • Page 18: Connectors

    Parallel Port VGA Port Display Port CN24 AUX FAN (BOM Option) CN25 SYS FAN USB Port 6/7 CN10 CN26 LAN2 External LED Axiomtek Front Panel CN11 CN28 SATA 0 Mouse CN12 CN29 SATA 2 Keyboard CN13 CN30 SATA 4 CPU FAN...

  • Page 19: Atx 4 Pin 12V In Connector (Cn5)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.1 ATX 4 Pin 12V IN Connector (CN5) You can connect it to the ATX12V power supply for CPU Core Voltage. Signal +12V +12V 2.4.2 Front Panel Connector (CN26) Power LED This 3-pin connector denoted as Pin 1 and Pin 5 connects the system power LED indicator to such a switch on the case.

  • Page 20: Lan1 Led Connectors (Cn19)

    SHB103 LAG1156 Full-Size SBC User’s Manual System Reset Switch Pin 11 and 12 can be connected to the case-mounted reset switch that reboots your computer instead of turning OFF the power switch. It is a better way to reboot your system for a longer life of the system’s power supply.

  • Page 21: Com Port Rs-232 Pin Assignment (Cn3, Cn6)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.5 COM Port RS-232 Pin Assignment (CN3, CN6) The serial interface for the board consists of CN3 port (COM2) support for RS-232, and CN6 (COM1) for RS- 232/RS-422/RS-485. Signal Signal Data Carrier Detect Data Set Ready (DSR) (DCD) Receive Data (RXD) Request to Send (RTS)

  • Page 22: Cpu Fan Connector (Cn30)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.7 CPU Fan Connector (CN30) A CPU fan is always needed for cooling CPU heat. The CPU fan connector CN30 provides power to the CPU fan. Signal 1 Ground 2 +12V Rotation Detection 4 Speed Control 2.4.8 System &...

  • Page 23: Floppy Disk Port Connector (Cn4)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.9 Floppy Disk Port Connector (CN4) The board provides a 34-pin header type connector, CN4, supporting up to two floppy drives. The floppy drives may be any one of the following types: 5.25" 360KB/1.2MB and 3.5" 720KB/1.44MB/2.88MB.

  • Page 24: Ps/2 Keyboard, Mouse Connectors (Cn28, Cn29)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.11 PS/2 Keyboard, Mouse Connectors (CN28, CN29) The board provides theMouse (CN28)/ Keyboard (CN29) interface with a 5-pin connector. Signal Clock DATA No connector 2.4.12 Ethernet RJ-45 Connectors (CN14, CN20) The RJ-45 connectors LAN1 and LAN2 are for Ethernet. To connect the board to 100-Base-T or 1000-Base-T hub, just plug one end of the cable into LAN1 and connect the other end (phone jack) to a 100-Base-T hub or 1000-Base-T hub.

  • Page 25: Parallel Port Connector (Cn7)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.13 Parallel Port Connector (CN7) Print Port Connector This board has a multi-mode parallel port to support: 1. Standard Mode: IBM PC/XT, PC/AT and PS/2™ are compatible with bi-directional parallel port. 2. Enhanced Mode: Enhance parallel port (EPP) is compatible with EPP 1.7 and EPP 1.9 (IEEE 1284 compliant).

  • Page 26: Sata Connectors (Cn11, Cn12, Cn13, Cn16, Cn17, Cn18)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.14 SATA Connectors (CN11, CN12, CN13, CN16, CN17, CN18) These SATA connectors are for high-speed SATA interface ports and they can be connected to hard disk devices. Signal SATA_TX+ SATA_TX- SATA_RX- SATA_RX+ 2.4.15 Internal USB Connectors (CN21, CN22, CN25) The 10-pin standard Universal Serial Bus (USB) connectors, CN21/22/25, on this board are for installing versatile USB interface peripherals.

  • Page 27: External Usb Port Connectors (Usb1, Usb2)

    SHB103 LAG1156 Full-Size SBC User’s Manual CN25 Signal Signal 1 USB_PWR USB_PWR 3 USB4- USB5- 5 USB4+ USB5+ 7 GND 10 GND 2.4.16 External USB Port Connectors (USB1, USB2) The 4-pin standard Universal Serial Bus (USB) port connector on the board is for the installation of peripherals supporting the USB interface.

  • Page 28: Display Port Connector (Cn24)

    SHB103 LAG1156 Full-Size SBC User’s Manual 2.4.18 Display Port Connector (CN24) CN24 is a Standard Display Port Connector co-layout with CN23. Signal DPB_LANE0 DPB_LANE0# DPB_LANE1 DPB_LANE1# CN24 DPB_LANE2 DPB_LANE2# DPB_LANE3 DPB_LANE3# Detect Pin DPB_AUX DPB_AUX# DPB_HPDE N.C. 3.3V Jumpers and Connectors...

  • Page 29: Chapter 3

    SHB103 LAG1156 Full-Size SBC User’s Manual CHAPTER 3 HARDWARE INSTALLATION ® Before installing the processor, please access Intel website for more detailed information Processor Integration Video (LGA1156): http://www.intel.com/support/tw/processors/sb/CS-030860.htm Installing the Processor The LGA1156 processor socket comes with a cover to protect the processor.
  • Page 30 SHB103 LAG1156 Full-Size SBC User’s Manual Step2 Removing the socket protective cover: 1. Place thumb against the front edge of the protective cover and rest index finger on the rear grip to maintain control of the cover. 2. Lift the front edge of the protective cover to disengage from the socket.
  • Page 31 SHB103 LAG1156 Full-Size SBC User’s Manual Step3 Processor installation: 1. Lift processor package from shipping media by grasping the substrate edges. Scan the processor package gold pads for any presence of foreign material. If necessary, the gold pads can be wiped clean with a soft lint-free cloth and isopropyl alcohol.
  • Page 32 SHB103 LAG1156 Full-Size SBC User’s Manual 4. Grasp the processor with thumb and index finger along the top and bottom edges. (Do not touch the Orientation Notches.) The socket will have cutouts for your fingers to fit into (see image below).
  • Page 33 SHB103 LAG1156 Full-Size SBC User’s Manual 6. Verify that package is within the socket body and properly connected to orientation keys. Hardware Installation...
  • Page 34 SHB103 LAG1156 Full-Size SBC User’s Manual 7. Close the socket (see image below): A. Gently lower the load plate. B. Make sure load plate's front edge slides under the shoulder screw cap as the lever is lowered. C. Latch the lever under the top plate's corner tab, being cautious not to damage the motherboard with the tip of the lever.
  • Page 35 SHB103 LAG1156 Full-Size SBC User’s Manual Step4 Fan heatsink handling: 1. Orientate the CPU cooling fan to fixing holes on the board. 2. Screw the CPU cooling fan onto the board. 3. Make sure the CPU fan is plugged to the CPU fan connector. Hardware Installation...
  • Page 36 SHB103 LAG1156 Full-Size SBC User’s Manual Step5 Removing the processor: 1. Open the socket: 1. Disengage the load lever. 2. Open the load plate. 2. Remove the Processor package, holding along the top and bottom edges, or by using a vacuum pen. 3.
  • Page 37 SHB103 LAG1156 Full-Size SBC User’s Manual A. Engage protective cover retention features to outside of LGA1156 Socket, AND align 2 cover corners to socket corners (This step is critical to avoid Bent Contact Damage!) B. Lower protective cover to attach to the LGA1156 Socket on Shoulder screw side 3.
  • Page 38 SHB103 LAG1156 Full-Size SBC User’s Manual 6. Close the socket load plate and engage the load lever (see image below). Hardware Installation...

  • Page 39: Installing The Memory

    SHB103 LAG1156 Full-Size SBC User’s Manual Installing the Memory The board supports four 240-pin DDR3 DIMM memory sockets with maximum memory capacity up to 16GB. Please follow steps below to install the memory modules: Push down latches on each side of the DIMM socket. Align the memory module with the socket that notches of memory module must match the socket keys for a correct installation.

  • Page 40: Chapter 4

    Make sure all correct settings are arranged for your installed microprocessor to prevent the CPU from damages. BIOS The SHB103 Series uses AMI Plug and Play BIOS with a single 32Mbit SPI Flash. System Memory The SHB103 Series supports four 240-pin DDR3 DIMM sockets for a maximum memory of 16GB DDR3 SDRAMs.

  • Page 41: I/O Port Address Map

    SHB103 LAG1156 Full-Size SBC User’s Manual I/O Port Address Map ® ® Core™2 Extreme/ The Intel Intel Core™ 2 Quad / Core™ ® 2 Duo/Celeron CPUs can communicate via I/O ports. There are total 1KB port addresses available for assignment to other devices via I/O expansion cards.

  • Page 42: Interrupt Controller (Irq) Map

    Serial port #2 (COM2) Interrupt Controller (IRQ) Map The SHB103 Series is a 100% PC compatible control board. It consists of 16 interrupt request lines, and four out of them can be programmable. The mapping list of the 16 interrupt request lines is shown as the following table.

  • Page 43: Chapter 5

    SHB103 LAG1156 Full-Size SBC User’s Manual CHAPTER 5 AMI BIOS UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. Starting To enter the setup screens, follow the steps below: Turn on the computer and press the <Del>...
  • Page 44 SHB103 LAG1156 Full-Size SBC User’s Manual The Left <Arrow> keys allow you to select a setup Left/Right screen. The Up and Down <Arrow> keys allow you to select Up/Down a setup screen or sub-screen. The Plus and Minus <Arrow> keys allow you to +−...

  • Page 45: Main Menu

    SHB103 LAG1156 Full-Size SBC User’s Manual Main Menu When you first enter the Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options.

  • Page 46: Advanced Menu

    SHB103 LAG1156 Full-Size SBC User’s Manual Advanced Menu The Advanced menu allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus: CPU Configuration IDE Configuration Floppy Configuration...
  • Page 47 SHB103 LAG1156 Full-Size SBC User’s Manual press <Enter> for more options. AMI BIOS Utility...
  • Page 48 SHB103 LAG1156 Full-Size SBC User’s Manual CPU Configuration This screen shows the CPU Configuration, and you can change the value of the selected option. Max CPUID Value Limit You can enable this item to let legacy operating systems boot even without support for CPUs with extended CPU ID functions.
  • Page 49 SHB103 LAG1156 Full-Size SBC User’s Manual PECI Use this item PECI (Platform Environment Control Interface) to execute the processor temperature monitoring and management. Intel (R) C-STATE tech Use this item to enable or disable the C-State technology. IDE Configuration You can use this screen to select options for the IDE Configuration, and change the value of the selected option.
  • Page 50 SHB103 LAG1156 Full-Size SBC User’s Manual SATA#1 Configuration Use this item to control the onboard SATA controller. Here are the options for your selection, Compatible, Disabled, and Enhanced. Configure SATA#1 as Use this item to choose the SATA operation mode. Here are the options for your selection, IDE and AHCI.
  • Page 51 SHB103 LAG1156 Full-Size SBC User’s Manual SuperIO Configuration You can use this screen to select options for the SuperIO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 52 SHB103 LAG1156 Full-Size SBC User’s Manual Parallel Port Address This item allows you to determine the I/O address for onboard parallel port. There are several options for your selection. Parallel Port Mode Select an operating mode for the onboard parallel (printer) port.
  • Page 53 SHB103 LAG1156 Full-Size SBC User’s Manual Hardware Health Configuration This screen shows the Hardware Health Configuration, and a description of the selected item appears on the right side of the screen. H/W Health Configuration This screen displays the temperature of CPU and System, Fan Speed, Vcore, etc.
  • Page 54 SHB103 LAG1156 Full-Size SBC User’s Manual ACPI Configuration You can use this screen to select options for the ACPI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 55 SHB103 LAG1156 Full-Size SBC User’s Manual AHCI Configuration You can use this screen to select options for the AHCI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 56 SHB103 LAG1156 Full-Size SBC User’s Manual Intel AMT Configuration You can use this screen to select options for the Intel AMT Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 57 SHB103 LAG1156 Full-Size SBC User’s Manual Intel VT-d Configuration You can use this screen to select options for the Intel VT-d Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 58 SHB103 LAG1156 Full-Size SBC User’s Manual Remote Access Configuration You can use this screen to select options for the Remote Access Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 59 SHB103 LAG1156 Full-Size SBC User’s Manual PCI Express Configuration This screen shows the PCI Express Configuration, and you can change its value. A description of the selected item appears on the right side of the screen. Active State Power-Management Use this item to enable or disable the function of Active State Power-Management to provide you with lower power consumption.
  • Page 60 SHB103 LAG1156 Full-Size SBC User’s Manual Trusted Computing You can use this screen to select options for the Trusted Computing, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 61 SHB103 LAG1156 Full-Size SBC User’s Manual USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 62 SHB103 LAG1156 Full-Size SBC User’s Manual setting is enabled. AMI BIOS Utility...

  • Page 63: Pci Pnp Menu

    SHB103 LAG1156 Full-Size SBC User’s Manual PCI PnP Menu The PCI PnP menu allows users to change the advanced settings for PCI/PnP devices. Clear NVRAM Use this item to clear the data in the NVRAM (CMOS). Here are the options for your selection, No and Yes. Plug &...
  • Page 64 SHB103 LAG1156 Full-Size SBC User’s Manual PCI Latency Timer This item controls how long a PCI device can hold the PCI bus before another takes over. The longer the latency, the longer the PCI device can retain control of the bus before handing it over to another PCI device.

  • Page 65: Boot Menu

    SHB103 LAG1156 Full-Size SBC User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: Boot Settings Configuration Boot Device Priority Removable Drives...
  • Page 66 SHB103 LAG1156 Full-Size SBC User’s Manual Boot Settings Configuration Quick Boot Enabling this item lets the BIOS skip some power on self tests (POST). The default setting is Enabled. AddOn ROM Display Mode This item selects the display mode for option ROM. The default setting is Force BIOS.
  • Page 67 SHB103 LAG1156 Full-Size SBC User’s Manual Wait For ‘F1’ Of Error If this item is enabled, the system waits for the F1 key to be pressed when error occurs. The default setting is Enabled. Hit ‘DEL’ Message Display If this item is enabled, the system displays the message “Press DEL to run Setup”...
  • Page 68 SHB103 LAG1156 Full-Size SBC User’s Manual Removable Drives Use this screen to view the removable drives in the system. The BIOS will attempt to arrange the removable drive boot sequence automatically. You can also change the booting sequence. AMI BIOS Utility...

  • Page 69: Security Menu

    SHB103 LAG1156 Full-Size SBC User’s Manual Security Menu The Security menu allows users to change the security settings for the system. Supervisor Password This item indicates whether a supervisor password has been set. If the password has been installed, Installed displays.
  • Page 70 SHB103 LAG1156 Full-Size SBC User’s Manual menu. You can use the sub menu to change the user password. AMI BIOS Utility...

  • Page 71: Chipset Menu

    SHB103 LAG1156 Full-Size SBC User’s Manual Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: North Bridge Configuration South Bridge Configuration ME Subsystem Configuration For items marked with “...
  • Page 72 SHB103 LAG1156 Full-Size SBC User’s Manual North Bridge Configuration Memory Remap Feature Use this item to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Only 64-bit OS supports this function. DRAM Frequency This item allows you to control the Memory Clock. Configure DRAM Timing by SPD This item can enable or disable DRAM timing by SPD (Serial Presence Detect) device, which is a small EEPROM...
  • Page 73 SHB103 LAG1156 Full-Size SBC User’s Manual Memory Hole You can reserve this area of system memory for ISA adapter ROM. When this area is reserved it cannot be cached. Check the user information of peripherals that need to use this area o f system memory for the memory requirements.
  • Page 74 SHB103 LAG1156 Full-Size SBC User’s Manual South Bridge Configuration GbE Wake Up From S5 This item specifies whether the system will be awakened from the S5 power. HDA Controller This item allows you to enable or disable the HD audio support.
  • Page 75 SHB103 LAG1156 Full-Size SBC User’s Manual ME Subsystem Configuration It is strongly recommended that you do not modify these options unless you are an advanced user. AMI BIOS Utility...

  • Page 76: Exit Menu

    SHB103 LAG1156 Full-Size SBC User’s Manual Exit Menu The Exit menu allows users to load your system configuration with optimal or failsafe default values. Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and reboot the computer so the new system configuration parameters can take effect.
  • Page 77 SHB103 LAG1156 Full-Size SBC User’s Manual Load Optimal Defaults It automatically sets all Setup options to a complete set of default settings when you select this option. The Optimal settings are designed for maximum system performance, but may not work best for all computer applications. In particular, do not use the Optimal Setup options if your computer is experiencing system configuration problems.

  • Page 78: Appendix A

    SHB103 LAG1156 Full-Size SBC User’s Manual APPENDIX A WATCHDOG TIMER Watchdog Timer Setting After the system stops working for a while, it can be auto-reset by the Watchdog Timer. The integrated Watchdog Timer can be set up in the system reset mode by program. Using the Watchdog Function Start ↓...
  • Page 79 SHB103 LAG1156 Full-Size SBC User’s Manual IF to disable WDT :O 2E 30 O 2F 00 ; Can be disable at any time N=00 M= 00h: Time-out Disable 01h: Time-out occurs after 1 second 02h: Time-out occurs after 2 second 03h: Time-out occurs after 3 second ………………………........

  • Page 80: Appendix B

    SHB103 LAG1156 Full-Size SBC User’s Manual APPENDIX B PCI IRQ ROUTING PICMG PCI IRQ Routing Device Slot PCI Slot 0 BCDA PCI Slot 1 CDAB PCI Slot 2 DABC PCI Slot 3 ABCD PCI IRQ Routing...

  • Page 81: Appendix C

    SHB103 LAG1156 Full-Size SBC User’s Manual APPENDIX C CONFIGURING SATA FOR RAID FUNCTION Configuring SATA Hard Drive(s) for RAID ® Function (Controller: Intel Q57 ) Please follow up the steps below to configure SATA hard drive(s): (1) Install SATA hard drive(s) in your system. (2) Enter the BIOS Setup to configure SATA controller mode and boot sequence.
  • Page 82 SHB103 LAG1156 Full-Size SBC User’s Manual (2)-1-1 Turn on your system, and then press the Del button to enter BIOS Setup during running POST (Power-On Self Test). If you want to create RAID, just go to the Advanced Settings menu/IDE configuration, select the Configure SATA#1 as, and press <Enter>...
  • Page 83 SHB103 LAG1156 Full-Size SBC User’s Manual (2)-1-2 A list of options appears, please select RAID. Configuring SATA for RAID Function...
  • Page 84 SHB103 LAG1156 Full-Size SBC User’s Manual Configuring SATA for RAID Function...
  • Page 85 SHB103 LAG1156 Full-Size SBC User’s Manual (2)-2 Set CDROM for First Boot Device under the Boot Settings menu to boot CD-ROM after system restarts. Configuring SATA for RAID Function...
  • Page 86 SHB103 LAG1156 Full-Size SBC User’s Manual (2)-3 Save and exit the BIOS Setup. (3) Configuring RAID by the RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if you do not want to create a RAID. (3)-1 After the POST memory testing and before the operating system booting, a message "Press <Ctrl-I>...
  • Page 87 SHB103 LAG1156 Full-Size SBC User’s Manual Configuring SATA for RAID Function...
  • Page 88 SHB103 LAG1156 Full-Size SBC User’s Manual (3)-3-1 After entering the CREATE VOLUME MENU screen, you can type the disk array name with 1~16 letters (letters cannot be special characters) in the item “Name”. (3)-3-2 When finished, press ENTER to select a RAID level. There are three RAID levels, RAID0, RAID1 and RAID5 &...
  • Page 89 SHB103 LAG1156 Full-Size SBC User’s Manual (3)-4 Set the stripe block size. The KB is the standard unit of stripe block size. The stripe block size can be 4KB to 128KB. After the setting, press ENTER for the array capacity. (3)-5 After setting all the items on the menu, select Create Volume and press ENTER to start creating the RAID array.
  • Page 90 SHB103 LAG1156 Full-Size SBC User’s Manual (3)-6 When prompting the confirmation, press “Y“ to create this volume, or “N“ to cancel the creation. After the creation is completed, you can see detailed information about the RAID Array in the DISK/VOLUME INFORMATION section, including RAID mode, disk block size, disk name, and disk capacity, etc.
  • Page 91 SHB103 LAG1156 Full-Size SBC User’s Manual Configuring SATA for RAID Function...
  • Page 92 SHB103 LAG1156 Full-Size SBC User’s Manual Delete RAID Volume If you want to delete a RAID volume, select the Delete RAID Volume option in Main Menu. Press ENTER and follow on-screen instructions. Please press [ESC] to exit the RAID BIOS utility. Now, you can proceed to install a SATA driver controller and the operating system.
  • Page 93 SHB103 LAG1156 Full-Size SBC User’s Manual (4) Making a SATA Driver Disk To install the operating system onto a serial ATA hard disk successfully, you need to install the SATA controller driver during the OS installation. Without the driver, the hard disk may not be recognized during the Windows setup process.
  • Page 94 SHB103 LAG1156 Full-Size SBC User’s Manual (5) Installing the SATA controller driver during the OS installation Now, the SATA driver disk is ready, and BIOS settings configured, you can proceed to install Windows 2000/XP onto your SATA hard drive using the SATA driver. Here is an example for Windows XP installation. (5)-1 Restart your system to boot the Windows 2000/XP Setup disk, and press F6 button as soon as you see the message "Press...
  • Page 95 SHB103 LAG1156 Full-Size SBC User’s Manual (5)-2 When you see the screen below, insert the floppy disk containing the SATA driver and press “S”. (5)-3 If the Setup correctly recognizes the driver of the floppy disk, a controller menu will appear below. Use the ARROW keys to select Intel®...
  • Page 96 SHB103 LAG1156 Full-Size SBC User’s Manual Note If a message on the screen saying that one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA driver again from the driver CD. Configuring SATA for RAID Function...

  • Page 97: Appendix D

    SHB103 LAG1156 Full-Size SBC User’s Manual APPENDIX D iAMT SETTINGS ® ® The Intel Active Management Technology (Intel iAMT) has decreased a major barrier to IT efficiency that uses built-in platform capabilities and popular third-party management and security applications to allow IT a better discovering, healing, and protection their networked computing assets.

  • Page 98: Set & Change Password

    SHB103 LAG1156 Full-Size SBC User’s Manual Set & Change Password 1. You will be asked to set a password when first log in. The default password is ‘admin’. Change Password 2. You will be asked to change the password before setting ME. iAMT Settings...
  • Page 99 SHB103 LAG1156 Full-Size SBC User’s Manual 3. You must confirm your new password while revising. (as Remark 1) Remark 1 The new password must contain: (example: !!11qqQQ) (default value) Eight characters One upper case One lower case One number ! 、 $ or ; ， One special symbol, such as (、...

  • Page 100: Intel Iamt Settings

    SHB103 LAG1156 Full-Size SBC User’s Manual ® Intel iAMT Settings ® Select Intel iAMT Configuration and press <ENTER>. ® Key in the Host Name. If Intel iAMT set to ‘DHCP‘, the Host name must be identical to the operating system mechanic. iAMT Settings...
  • Page 101 SHB103 LAG1156 Full-Size SBC User’s Manual Select TCP/IP to get into Network interface, and set it to ‘ENABLED’; into DHCP Mode, and set it to ‘DISABLED’ (as Remark 2) ; into Domain name, and set the Intel Management Engine domain name, such as ‘AMT.intel.com’. (3-1) (3-2) iAMT Settings...
  • Page 102 SHB103 LAG1156 Full-Size SBC User’s Manual Remark 2 DHCP Mode ‘DISABLED‘: if DHCP Mode is disabled, you can make the following settings: IP address Subnet mask iAMT Settings...
  • Page 103 SHB103 LAG1156 Full-Size SBC User’s Manual Default Gateway address Preferred DNS address iAMT Settings...
  • Page 104 SHB103 LAG1156 Full-Size SBC User’s Manual Alternate DNS address Domain name Exit from MEBx after completing the iAMT settings. iAMT Settings...

  • Page 105: Iamt Web Console

    SHB103 LAG1156 Full-Size SBC User’s Manual iAMT Web Console From a web browser, please type http://(IP ADDRESS):16992, which connects to iAMT Web. Example: http://10.1.40.214:16992 To log on, you will be required to type in username and password for access to the Web. USER: admin (default value) PASS: (MEBx password) iAMT Settings...
  • Page 106 SHB103 LAG1156 Full-Size SBC User’s Manual Enter the iAMT Web. Click Remote Control, and select commands on the right side. 5. When you have finished using the iAMT Web console, close the Web browser. iAMT Settings...

  • Page 107: Appendix E

    SHB103 LAG1156 Full-Size SBC User’s Manual APPENDIX E PICMG v1.3 INTERFACE DEFINITION x16 PCIe Connector A x16 PCIe Connector C Side B Side A Side B Side A 1 N.C 1 USB0P 2 GND 2 USB0N 3 N.C 3 GND USB1P 4 N.C 4 GND...
  • Page 108 SHB103 LAG1156 Full-Size SBC User’s Manual Mechanical Key 29 REFCLK0+ 29 N.C 30 REFCLK0- 30 N.C 31 GND REFCLK1+ 31 N.C 32 RSVD REFCLK1- 32 N.C 33 REFCLK2+ 33 N.C 34 REFCLK2- 34 N.C 35 GND REFCLK3+ 35 N.C 36 RSVD REFCLK3- 36 GND 37 REFCLK4+...
  • Page 109 SHB103 LAG1156 Full-Size SBC User’s Manual Mechanical Key 64 GND a_PERn4 64 GND 65 a_PETp5 65 GND 66 a_PETn5 66 GND 67 GND a_PERp5 67 GND 68 GND a_PERn5 68 GND 69 a_PETp6 69 GND 70 a_PETn6 70 GND 71 GND a_PERp6 71 GND 72 GND...
  • Page 110 SHB103 LAG1156 Full-Size SBC User’s Manual Mechanical Key 12 GND 12 CLKC CLKD 13 a_PETp10 13 GND +3.3V 14 a_PETn10 14 CLKA CLKB 15 GND a_PERp10 15 +3.3V 16 GND a_PERn10 16 AD31 17 a_PETp11 17 AD29 +3.3V 18 a_PETn11 18 N.C AD30 19 GND...
  • Page 111 SHB103 LAG1156 Full-Size SBC User’s Manual 47 +12V +12V 47 GND AD02 48 +12V +12V 48 AD03 AD01 49 +12V +12V 49 AD00 Note Please contact your vendor to get the backplane design guide if it’s required. The backplane design guide is NDA required.

Table of Contents