Phoenix-Award Bios Utility; Entering Setup - AXIOMTEK SHB101 User Manual

SHB101 LGA775 SBC User's Manual
Chapter 5

PHOENIX-AWARD BIOS Utility

The Phoenix-Award BIOS provides users with a built-in Setup program to modify basic system
configuration. All configured parameters are stored in a battery-backed-up RAM (CMOS RAM)
to save the Setup information whenever the power is turned off.
5.1

Entering Setup

There are two ways to enter the Setup program. You may either turn ON the computer and
press <Del> immediately, or press the <Del> and/or <Ctrl>, <Alt>, and <Esc> keys
simultaneously when the following message appears at the bottom of the screen during POST
(Power on Self Test).
TO ENTER SETUP PRESS DEL KEY
If the message disappears before you respond and you still want to enter Setup, please restart
the system to try it again. Turning the system power OFF and ON, pressing the "RESET"
button on the system case or simultaneously pressing <Ctrl>, <Alt>, and <Del> keys can
restart the system. If you do not press keys at the right time and the system doesn't boot, an
error message will pop out to prompt you the following information:
PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP
PHOENIX-AWARD BIOS Utility 27