AXIOMTEK SHB101 User Manual page 79

Intel core 2 quad/core 2 duo celeron processor picmg 1.3 full-size single board computer

Hide thumbs Also See for SHB101:

Table of Contents

(4) Making a SATA Driver Disk

To install the operating system onto a serial ATA hard disk successfully, you need to install the

SATA controller driver during the OS installation. Without the driver, the hard disk may not be

recognized during the Windows setup process. First of all, please format a blank floppy disk.

Secondly, follow up these steps below to produce a SATA driver disk.

(4)-1 Users can insert the Driver CD and the formatted blank floppy disk in another system.

And then, please execute the f6flpy32.exe file in the folder of the Driver CD.

Please execute the f6flpy64.exe file, if installing 64-bit Windows Operating System.

Note

(4)-2 When this screen pops out, please click the "CONFIRM" button.

(4)-3 When the RAID Driver is written to the floppy disk, the SATA driver disk is completed.

Please execute the f6flpy64.exe file, if installing 64-bit Windows Operating System.

Note

Configuring SATA for RAID Function

SHB101 LGA775 SBC User's Manual

Table of Contents