Ma Input Calibration (-P Only); System Information - Fluke 9190A Operator's Manual

9190A
Operators Manual

mA Input Calibration (-P Only)

Table 2-22 shows and describes the menu selections on the mA Input Calibration menu.
This menu is available on the -P Model only.
MENU
Item
mA C4

mA C22

INPUT CAL DATE


System Information

Table 2-22 shows and describes the menu selections on the System Information menu.
MENU
Item
MODEL shows the model number of the Calibrator.

SERIAL shows the serial number of the Calibrator.

FW VER shows the firmware version of the Calibrator.

CAL DATE shows the calibration date of the heat source.

INPUT CAL DATE

2-22
Table 2-22. mA Input Calibration Menu
S Y S T E M C A L
M E N U C A L I B UUT
[-P Only]
adjusts the measurement at 4 mA.
[-P Only]
adjusts the measurement at 22 mA.
[-P Only]
is the calibration date for the measurement function of the Calibrator.
Table 2-23. System Information Menu
S Y S T E M S Y S T E M
MENU I N F O
[-P Only]
shows the calibration date for the readout or the -P module.
66.03°C
m A I N P U T C A L I B R A T I O N
C A L m A
mA C22:
INPUT CAL DATE:
Function
66.03°C
S Y S T E M I N F O R M A T I O N
MODEL: 9190
SERIAL: 022
FW VER: 0.221/0.548
CAL DATE: 2012-05-01
INPUT CAL DATE: 01/05/2012
Function
1
2
mA C4: -0.0075
3
-0.0044
2012-05-01
gzs023.eps
1
2
3
4
5
gzs024.eps