Control Setup - Fluke 9190A Operator's Manual

9190A
Operators Manual

Control Setup

Table 2-19 shows and describes the menu selections on the Control Setup menu.
MENU
Item
TEMP PB sets the main zone proportional band and the gain in °C that the proportional-integral-

derivative (PID) controller uses for main zone control.
TEMP INT sets the main zone integral, which is the integration time in seconds that the PID

controller uses for main zone control.
TEMP DER sets the main zone derivative, which is the derivative time in seconds that the PID

controller uses for main zone control.
GRAD PB sets the gradient proportional band and the gain in °C at the proportional-integral-

derivative (PID) controller uses for gradient zone control.
GRAD INT sets the gradient integral, which is the integration time in seconds that the PID

controller uses for gradient zone control.
REF PB sets the main zone proportional band like item  when an external reference probe is

used for control.
REF INT sets the main zone integral like item  when an external reference probe is used

control.
REF DER sets the main zone derivative like item  when an external reference probe is used

for control.
2-20
Table 2-19. Control Setup Menu
S Y S T E M
M E N U C A L I B
66.03°C
C O N T R L
TEMP DER:
Function
C O N T R O L S E T U P
TEMP PB: 10.0
TEMP INT: 100.0
8.0
GRAD PB: 20.0
GRAD INT: 150.0
REF PB: 10.0
REF INT: 100.0
REF DER: 8.0
1
2
3
4
5
6
7
8
gzs020.eps