Show Policer; Table 17: Show Policer Output Fields - Juniper EX9200 Features Manual

show policer

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2016, Juniper Networks, Inc.
show policer
<detail>
<policer-name>
Command introduced before Junos OS Release 7.4.
Option detail introduced in Junos OS Release 12.3.
Display the number of policed packets for a given policer or an aggregate policer. An
aggregate policer is an aggregate of different policers on the same logical interface.
none —Display the number of policed packets for all configured policers.
—(Optional) Display enhanced statistics and counters for policers.
detail
policer-name —(Optional) Display the number of policed packets for the specified policer.
view
show policer (MX Series) on page 258
show policer (non MX Series Router) on page 258
show policer (Aggregate Policer, non MX Series Router) on page 258
show policer detail on page 259
Table 17 on page 257 lists the output fields for the
are listed in the approximate order in which they appear.

Table 17: show policer Output Fields

Field Name
Name
Bytes
Packets
Chapter 19: Firewall Filter and Policer Operational Mode Commands
show policer
Field Description
Name of the policer.
(For two-color policers on MX Series routers, and for hierarchical
policers on MS-DPC, MIC, and MPC interfaces on MX Series
routers)—Total number of bytes policed by the specified policer.
For other combinations of policer type, device, and line card type,
this field is blank.
(T Series and M10i)—Not applicable. The Bytes information is
not displayed.
Total number of packets policed by the specified policer.
command. Output fields
257