Juniper EX9200 Features Manual page 185

Related
Documentation
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
information for the logical interface. Within that section, the Input Filters field displays
the name of IPv4 firewall filters associated with the logical interface.
user@host> show interfaces ge-2/0/5.0 detail
Logical interface ge-2/0/5.0 (Index 105) (SNMP ifIndex 556) (Generation 170)
Flags: Device-Down SNMP-Traps 0x4004000 Encapsulation: ENET2
Traffic statistics:
Input bytes :
Output bytes :
Input packets:
Output packets:
Local statistics:
Input bytes :
Output bytes :
Input packets:
Output packets:
Transit statistics:
Input bytes :
Output bytes :
Input packets:
Output packets:
Protocol inet, MTU: 1500, Generation: 242, Route table: 0
Flags: Sendbcast-pkt-to-re
Input Filters: filter-trtcm1ca-all
Addresses, Flags: Dest-route-down Is-Preferred Is-Primary
Destination: 10.20.130/24, Local: 10.20.130.1, Broadcast: 10.20.130.255,
Generation: 171
Protocol multiservice, MTU: Unlimited, Generation: 243, Route table: 0
Policer: Input: __default_arp_policer__
Two-Rate Three-Color Policer Overview on page 161
Three-Color Policer Configuration Overview on page 145
Three-Color Policer Configuration Guidelines on page 149
Chapter 15: Basic Two-Rate Three-Color Policers
0
0
0
0
0
0
0
0
0 0 bps
0 0 bps
0 0 pps
0 0 pps
167