Traffic Policers Feature Guide for EX9200 Switches
Multifield Classification Requirements and Restrictions
Supported Platforms
CoS Tricolor Marking Requirement
Restrictions
Related
Documentation
118
This topic covers the following information:
Supported Platforms on page 118
CoS Tricolor Marking Requirement on page 118
Restrictions on page 118
The
loss-priority
firewall filter action is supported on the following routing platforms only:
EX Series switches
M7i and M10i routers with the Enhanced CFEB (CFEB-E)
M120 and M320 routers
MX Series routers
T Series routers with Enhanced II Flexible PIC Concentrators (FPCs)
PTX Series routers
The
firewall filter action has platform-specific requirements dependencies
loss-priority
on the CoS tricolor marking feature, as defined in RFC 2698:
On an M320 router, you cannot commit a configuration that includes the
firewall filter action unless you enable the CoS tricolor marking feature.
On all routing platforms that support the
set the
loss-priority
firewall filter action to
enable the CoS tricolor marking feature. .
To enable the CoS tricolor marking feature, include the
hierarchy level.
class-of-service]
You cannot configure the
loss-priority
the same firewall filter term. These two nonterminating actions are mutually exclusive.
NOTE:
On a PTX Series router, you must configure the
separate rule and not combine it with the rule configuring the
and
loss-priority
Series Packet Transport Routers and T Series Matrix Routers.
Firewall Filter Nonterminating Actions
Two-Color Policer Configuration Overview on page 49
loss-priority
medium-low
and
three-color-policer
actions. See Firewall and Policing Differences Between PTX
loss-priority
firewall filter action, you cannot
or
medium-high
unless you
statement at the
tri-color
nonterminating actions for
action in a
policer
forwarding-class
Copyright © 2016, Juniper Networks, Inc.
[edit
,