Juniper EX9200 Features Manual page 233

Traffic policers feature guide ex series
Hide thumbs Also See for EX9200:
Table of Contents

Advertisement

Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Support for
if-exceeding-pps
Junos OS Release 15.2.
Use a hierarchical policer to rate-limit ingress Layer 2 traffic at a physical or logical
interface and apply different policing actions based on whether the packets are classified
as
premium
for expedited forwarding (EF) or
policers defined within the hierarchical policer are
Hierarchical policers are supported on Enhanced Intelligent Queuing (IQE) PICs and
SONET interfaces hosted on the M120 and M320 with incoming Flexible PIC Concentrators
(FPCs) as SFPC and outgoing FPCs as FFPC; on MPCs hosted on MX Series routers; on
the T320, T640, and T1600 with Enhanced Intelligent Queuing (IQE) PICs; and on the
T4000 with Type 5 FPC and Enhanced Scaling Type 4 FPC.
NOTE:
The
if-exceeding-pps
with MPCs.
The
if-exceeding
and, therefore, cannot be applied at the same time.
—Name that identifies the policer. The name can contain letters,
hierarchical-policer-name
numbers, and hyphens (-), and can be up to 255 characters long. To include spaces
in the name, enclose the name in quotation marks (" ").
—When you configure a hierarchical policer at the
uid
hierarchy level, you must assign a variable UID as the policer name.
firewall]
The remaining statements are explained separately.
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Hierarchical Policer Configuration Overview
Hierarchical Policers
aggregate (Hierarchical Policer)
bandwidth-limit (Hierarchical Policer)
burst-size-limit (Hierarchical Policer)
pps-limit (Hierarchical Policer)
packet-burst (Hierarchical Policer)
if-exceeding (Hierarchical Policer)
if-exceeding-pps (Hierarchical Policer)
premium (Hierarchical Policer)
statement on MX Series routers with MPCs introduced in
aggregate
aggregate
statement is only supported on MX Series routers
and
statements are mutually exclusive
if-exceeding-pps
[edit dynamic-profiles profile name
Chapter 18: Configuration Statements
for a lower priority. The two
and
.
premium
215

Advertisement

Table of Contents
loading

Table of Contents