Action - Juniper EX9200 Features Manual

Traffic Policers Feature Guide for EX9200 Switches

action

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
198
policer (Configuring) on page 233
policer (Firewall Filter Action) on page 234
prefix-action (Configuring) on page 235
prefix-action (Firewall Filter Action) on page 236
single-rate on page 237
three-color-policer (Applying) on page 238
three-color-policer (Configuring) on page 239
two-rate on page 240
action {
loss-priority high then discard;
}
[edit dynamic-profiles profile-name firewall
[edit firewall three-color-policer
[edit logical-systems logical-system-name firewall
Statement introduced in Junos OS Release 8.2.
Logical systems support introduced in Junos OS Release 9.3.
Support at the
[edit dynamic-profiles ... three-color-policer]
Junos OS Release 11.4.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Discard traffic on a logical interface using tricolor marking policing.
NOTE: This statement is supported only on IQ2 interfaces.
The remaining statement is explained separately.
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Three-Color Policer Configuration Overview on page 145
Basic Single-Rate Three-Color Policers on page 153
Basic Two-Rate Three-Color Policers on page 161
Two-Color and Three-Color Logical Interface Policers on page 171
Two-Color and Three-Color Physical Interface Policers on page 185
Two-Color and Three-Color Policers at Layer 2 on page 39
loss-priority high then discard on page 224
three-color-policer
name],
three-color-policer
Copyright © 2016, Juniper Networks, Inc.
name],
name]
hierarchy level introduced in