Juniper EX9200 Features Manual page 66

Traffic Policers Feature Guide for EX9200 Switches
Purpose
Action
Related
Documentation
Related
Documentation
48
Output: trTCM2-cb-ge-1/3/1.0-log_int-o
The log_int-i suffix denotes a logical interface policer applied to input traffic, while the
log_int-o suffix denotes a logical interface policer applied to output traffic. In this example,
the logical interface policer is applied to in the input direction only.
Displaying Statistics for the Policer
Verify the number of packets evaluated by the policer.
Use the operational mode command and optionally specify the name of
show policer
the policer. The command output displays the number of packets evaluated by each
configured policer (or the specified policer), in each direction. For the policer
the input and output policer names are displayed as follows:
trTCM2-cb-ge-1/3/1.0-log_int-i
trTCM2-cb-e-1/3/1.0-log_int-o
The log_int-i suffix denotes a logical interface policer applied to input traffic, while the
log_int-o suffix denotes a logical interface policer applied to output traffic. In this example,
the logical interface policer is applied to input traffic only.
Logical Interface (Aggregate) Policer Overview on page 171
Example: Configuring a Two-Color Logical Interface (Aggregate) Policer on page 172
Three-Color Policing at Layer 2 Overview on page 41
layer2-policer on page 220
logical-interface-policer on page 222
three-color-policer (Configuring) on page 239
Guidelines for Applying Traffic Policers on page 15
layer2-policer on page 220
logical-interface-policer on page 222
policer (Configuring) on page 233
three-color-policer (Configuring) on page 239
statement
statement
statement
trTCM2-cb
Copyright © 2016, Juniper Networks, Inc.
,