Juniper EX9200 Features Manual page 160

Traffic Policers Feature Guide for EX9200 Switches
Verification
Purpose
Action
142
}
[edit]
user@host# show interfaces
ge-1/3/1 {
per-unit-scheduler;
vlan-tagging;
unit 0 {
vlan-id 100;
layer2-policer {
input-policer 500Kbps;
}
family inet {
address 10.10.10.1/30;
}
}
unit 0 {
vlan-id 101;
family inet {
address 20.20.20.1/30 {
arp 20.20.20.2 mac 00:00:11:22:33:44;
}
}
}
}
If you are done configuring the device, enter
Confirm that the configuration is working properly.
Displaying Traffic Statistics and Policers for the Logical Interface on page 142
Displaying Statistics for the Policer on page 143
Displaying Traffic Statistics and Policers for the Logical Interface
Verify the traffic flow through the logical interface and that the policer is evaluated when
packets are received on the logical interface.
Use the operational mode command for logical interface
show interfaces
include the detail or extensive
lists the number of bytes and packets received and transmitted on the logical interface,
and the Protocol inet section contains a Policer field that would list the policer
as an input or output policer as follows:
Input: 500Kbps-ge-1/3/1.0-log_int-i
Output: 500Kbps-ge-1/3/1.0-log_int-o
The log_int-i suffix denotes a logical interface policer applied to input traffic, while the
log_int-o suffix denotes a logical interface policer applied to output traffic. In this example,
the logical interface policer is applied to Input traffic only.
commit from configuration mode.
option. The command output section for Traffic statistics
Copyright © 2016, Juniper Networks, Inc.
, and
ge-1/3/1.0
500Kbps