Filter-Specific - Juniper EX9200 Features Manual

Related
Documentation

filter-specific

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Three-Color Policer Configuration Overview on page 145
Policer Bandwidth and Burst-Size Limits
Policer Color-Marking and Actions on page 18
Dual Token Bucket Algorithms on page 22
Determining Proper Burst Size for Traffic Policers on page 30
committed-burst-size on page 208
committed-information-rate on page 210
filter-specific;
[edit dynamic-profiles profile-name firewall
[edit firewall family inet prefix-action
[edit firewall policer policer-name],
[edit logical-systems logical-system-name firewall
[edit logical-systems logical-system-name firewall family inet
Statement introduced before Junos OS Release 7.4.
Logical systems support introduced in Junos OS Release 9.3.
Support at the
[edit dynamic-profiles ... policer policer-name]
in Junos OS Release 11.4.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Set the prefix-specific action or policer to operate in filter-specific mode, meaning that
a single policer and counter are shared by all filter terms that reference the prefix-specific
action or policer. By default, the prefix-specific action or policer operates in term-specific
mode, meaning that a separate policer and counter are used for each filter term that
references the prefix-specific action or policer.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Filter-Specific Policer Overview on page 85
Prefix-Specific Counting and Policing Overview on page 97
Filter-Specific Counter and Policer Set Overview on page 100
Chapter 18: Configuration Statements
policer policer-name],
name],
policer policer-name],
prefix-action
hierarchy level introduced
name]
213